TP-22 Digital Wireless Remote Meat BBQ Grill Cooking Thermometer

Why Choose ThermoPro

Shipping Info

Shipping Rates

• Free Standard Shipping (3-5 business days) – $0
• Expedited Shipping (2 business days) – $9.05 to $9.60
• Priority Shipping (1 business day) – $17.00 to $18.50

These shipping rates are an estimate based on a quantity of one item sent from our US or Canada warehouse, depending on your location and cost will go up if purchasing more than one item. Final shipping cost will be calculated at checkout.

Shipping Times

Listed below are our estimated delivery dates based off what day you decide to order and what type of shipping you select. All shipping estimates are subject to product availability, shipping regulations and delays that may be out of our control. Our staff is dedicated to seeing that you see your product shipped on time, safely and undamaged.

Important Note: If you do not order before our daily shipping cut off time (1:00 PM EST) then your order will be shipped the day after the order was placed.

Instruction Manual

Receiver Features

• LCD (Liquid Crystal Display) – Displays all icons, temperature and time.
• Dual probe temperature display.
• Programmable alert with preset temperatures for specific foods.
• 99-hour, 59-minute countdown timer and count up timer.
• Temperature range of probe: 32˚F to 572˚F (0˚C to 300˚C).
• Temperature tolerance of internal food reading: +/-1.8˚F (+/-1.0˚C).
• Battery compartment – Holds 2 AAA batteries.
• Belt clip/Stand – Belt clip allows you to be mobile. Clip the receiver unit to belt.
• Swings out and allow you to stand the receiver on tabletop as well.

Buttons

1. MODE – Press to select Thermometer Probe 1, Thermometer Probe 2 or Timer mode. Press and hold for 2 seconds to enter Synchronization/Pairing mode.
2. ▲ – In thermometer mode (Probe 1 or 2), press once to increase the temperature value. Press and hold for 2 seconds and the temperature value will increase at a faster pace. In timer mode, press once to increase Hour, Minute or Second setting. Press and hold for 2 seconds, the hours, minutes or seconds will increase at a faster pace.
3. ▼ – In thermometer mode (Probe 1 or 2), press once to decrease the temperature value. Press and hold for 2 seconds, the temperature value will decrease at a faster pace. In timer mode, press once to decrease Hour, Minute or Second setting. Press and hold for 2 seconds, the hours, minutes or seconds will decrease at faster pace.
4. ST/SP/CLEAR – When setting the timer, press to confirm the setting. When the timer setting is set, press once to start the timer. When the timer is running, press once to pause the timer. Press and hold for two seconds to clear timer setting.
5. MEAT – In thermometer mode, press to select the meat type: PROG (program – User Self-Defined), GBEEF (Ground Beef), GPOUL (Ground Poultry), BEEF, VEAL, CHCKE (Chicken), PORK, POULT (Poultry), LAMB & FISH and OVEN. In Timer mode, press to select Hour, Minute mode or Minute’ second” mode.
6. TASTE – In thermometer mode, press to select the meat taste level: RARE, MED RARE, MEDIUM, MEDIUM WELL and WELL DONE.
7. /ºF/ºC–Press once to turn on or off the backlight, Press and hold for 2 seconds to select temperature readings in Celsius or Fahrenheit.
8. – Press once to turn ON/OFF the receiver.

LCD Screen

Transmitter Features

• LCD (Liquid Crystal Display) – displays temperatures of both probe 1 and probe 2. It will automatically switch between probe 1 and probe 2 displays.
• Wire Stand – Allows you to stand the transmitter on tabletop or it can be reversed and used as a hanger.
• Battery Compartment – holds 2 AAA batteries.
• Sensor socket hole – Plug-in for stainless steel probe 1 and probe 2.

Button

ºF/ºC/ – Press once to turn on or off the transmitter. Press and hold for 2 seconds to select the transmitter temperature display in ºC or ºF.

Installing batteries

Open the battery compartment of the receiver and insert two “AAA” batteries with correct polarity. Open the battery compartment of the transmitter and insert two “AAA” batteries with correct polarity.

Turn On/Off Unit

• Press  button on the receiver to turn on/off the receiver;
• Press ºF/ºC/ button on the transmitter to turn on/off the transmitter.

Synchronize/Pair Transmitter and Receiver

The transmitter and receiver were already paired at our manufacturing facility. Usually you do NOT need to re-synchronize or re-pair the units. You just plug in the probes, insert batteries, turn on the receiver and the transmitter and wait for a few seconds, you will see the temperatures shown on both receiver and transmitter and the units are ready for use.

However, in some unusual cases, the transmitter and receiver are no longer paired, then you may need to re-synchronize them by following the below steps:

1. Insert the stainless steel probes into the corresponding plugs in the transmitter.
2. Turn on the transmitter by pressing the ºF/ºC/ button. The transmitter will show the current temperatures on its LCD display.
3. Turn on the receiver by pressing the  button.
4. Press and hold Mode button on receiver for 2~3 seconds to enter the synchronization mode which will last for 60 seconds. The display shows “—” and it is flashing.
5. Wait for a moment until the temperature reading shows on the receiver display, it means the synchronization/Pairing is complete. Your professional remote cooking thermometer is now ready for use.

Note: The synchronization between the transmitter and the receiver won’t be lost even if you replace the batteries.

Loss link alert

If the receiver is taken out of range or there is abnormal external interference or after shutting off the transmitter, the receiver may not be able to receive the transmission from the transmitter. If this happens for over 4 minutes, the unit will alert you the signal is lost. Pressing any button on Receiver will stop the Loss Link beep.

To regain transmission signal, move the receiver closer to the transmitter, the link should be automatically restored and the temperatures should appear on the receiver display.

Auto Off Feature

The receiver will turn off automatically if it hasn’t received the temperature signal from the transmitter for more than 30 minutes, a beep will sound for one minute before it shuts down. However, the Auto Off feature will be automatically disabled if the timer is running.

Using the Timer

Count down

1. Press the MODE button to select the TIMER mode. The timer 00:00 with a small icon TIMER will be shown in the upper part of the display.
2. Press MEAT to switch between Hour: Minute timer to a minute’ second” timer and back.
3. Press ▲ or ▼ to adjust timer setting. Press and hold ▲ or ▼ to adjust setting at a faster pace. Press ST/SP/CLEAR to confirm the setting. The maximum countdown timer setting is 99 hours and 59 minutes.
4. Press and hold ST/SP/CLEAR to clear the setting back to 00:00.
5. After setting, press ST/SP/CLEAR to start the timer. TIMER ▼ will blink indicating the countdown timer is running.
6. To pause the countdown process, press the ST/SP/CLEAR button. The TIMER ▼ becomes solid. Press the ST/SP/CLEAR button to continue the timer.
7. When countdown timer reaches 00:00, an alarm will sound and backlight will be on for one minute.

Note: When the timer counts down below 1 hour 1:00, the display will automatically change to 59’59” to indicate, 59 minutes 59 seconds. The seconds will be shown counting down then. When the countdown reaches 0’00” the timer starts counting up and it will beep for 60 seconds. Press any button to stop the timer.

Count up

1. Press the MODE button to select the TIMER mode, The timer 00:00 with a small icon TIMER will be shown in the upper part of the display. If the timer setting is not 00:00, press and hold ST/SP/CLEAR to clear the setting to 00:00.
2. Press the ST/SP/CLEAR button to start count up. The TIMER ▲ will blink indicating count up timer is running. The maximum count up that can be reached is 99 hours and 59 minutes.
3. To stop the count up process, press the ST/SP/CLEAR button. The TIMER ▲ becomes solid.
4. Press and hold ST/SP/CLEAR to clear the setting back to 00:00.
5. When count up timer reaches 59 minutes and 59 seconds, it will automatically change to Hour: Minute display format.

Cautions:

1. Always wear a heat resistant glove to touch the stainless steel probe sensors or wires during or just after cooking. Do not touch with bare hands.
2. Keep the stainless steel probe sensors and wires away from children.
3. Clean the stainless steel probes and dry thoroughly after each and every use.
4. Do not use the unit in the rain. It is NOT rain proof.
5. Do not expose the plugs of the stainless steel probes or the plug in holes of the transmitter to water or any liquid. This will result in a bad connections and faulty readings.
6. Do not expose the receiver or transmitter to direct heat.
7. Do not use stainless steel probes in a microwave oven.
8. The Probe Thermometer registers temperatures as low as 32 ºF (0 ºC) and as high as 572 ºF (300 ºC). LLL will be displayed below 32 ºF and HHH will be displayed above 572 ºF. Do not use the stainless probe sensor above 572 ºF. Doing so will deteriorate the wire.
9. Not Intended for use by persons aged 12 and under.

Cleaning

1. Always wear a heat resistant glove to touch the stainless steel probe sensors or wires during or just after cooking. Do not touch with bare hands.
2. Keep the stainless steel probe sensors and wires away from children.
3. Wash the metal probe tips with hot soapy water and dry thoroughly. Do not immerse the probe in water while cleaning.
4. Wipe the transmitter and receiver with damp cloth. Do not immerse either in water.

Refund Policy

Warranty Policy

• Standard 1 Year Warranty – 3 Year Warranty if you register your warranty here: https://buythermopro.com/warranty-registration/
• 5 Year Replacement Warranty For All Products and Lifetime Probe Warranty Purchased in 2017!

Our Warranty Policy is stress free! Simply Contact Us, and we’ll arrange a replacement! No need to send anything for repairs and be without equipment, just sit back, relax and await your new unit. Once it arrives, you don’t even have send back the defective unit, dispose of according to state laws. It’s that easy. We Stand by our products and customers who purchase our devices.

Return Policy

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. Once the product is returned back to us, we will immediately issue a refund. If you have returned your product and not received a refund, please Contact us!

FAQs

Question: Are the TP 20 and 22 water/splash proof? Are the displays backlit on each? Answer: Yes, they’re splashproof and both have backlights. Question: Does this model have any high or low temperature alarms? Answer:Yes, it does. Question: How does this unit differ from the TP-20? Answer:The unit just features a different design. Other than that, functionality wise they’re the same.