【Large backlit touchscreen】4”large LCD display features a backlit touchscreen, making the indoor outdoor weather station easier to read in dim light conditions and superbly simple to use.
【Wireless temperature and humidity monitor】 measures indoor/outdoor temperatures and humidity percentages. Capable of displaying the readings from up to 3 outdoor remote sensors to monitor multiple locations. Temperature displayed in °F or °C.
【MAX & MIN records】All time/24 hours MAX & MIN temperature and humidity percentages recorded and displayed on humidity gauge. Temperature/Humidity trend arrows indicate whether it’s getting warmer or colder or more humid near the remote sensor.
【200ft Remote range】indoor/outdoor thermometer wireless with 200ft/60m remote range, capable of strong signal penetration (enhanced 433 MHz); Tabletop, wall-mountable and magnetic back design.
【Multiple placement options】Digital outdoor thermometer, features a magnetic back to allow you to easily attach to any metal surface; a hanging hole for hooks；tabletop for any layout situation, which help you place your outdoor thermometer anywhere to fit your home’s needs!
ThermoPro TP65 Digital Hygrometer Thermometer，Jumbo Touchscreen and Backlight Temperature Humidity Monitor, 200ft/60m Range
Equipped with professional grade sensors, the ThermoPro TP65 thermometer provides the most accurate measurements, be it for indoor humidity or temperature, allowing you to be aware if adjustments are necessary for your household. The indoor thermometer and humidity gauge is not just highly accurate but extremely user friendly with a backlight for those last-minute nighttime checks on current readings before bed. That’s not all, no longer will it be necessary to unmount the device off your wall or fridge to switch settings, simply use the sleek touchscreen display. Furthermore, this temperature gauge provides an abundance of valuable information,such as displaying 24 hour/all-time high/low records and current trends for both humidity and temperature and humidity level icons that indicate if your home is too humid, too dry or just right!
NOTE
If outdoor sensor stop working and the weather turns very cold,please try rechargeable(nickel cadmium) batteries or Lithium batteries.
Package:
1 x Base Station Unit (Receiver).
1 x Remote Sensor (Transmitter).
4 x AAA size batteries (included)
Specifications:
Transmission frequency:433 Mhz
Transmission range up to 200 feet in open area.(range maybeshorter based on interference present)
Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C)
Outdoor Temperature range: -4°F ~ 158°F (-20 °C ~ 70 °C)
Humidity range: 10% ~ 99%
Temperature tolerance: +/- 2.0 °F (+/- 1.1 °C)
Humidity tolerance: ±2% from 30% to 80%; ±3% below 30% and above 80%
Power: 2 X AAA 1.5V for base unit and 2 X AAA 1.5V for remote sensor
Features:
Large Screen with Huge Digits displays the current indoor-outdoor temperature and humidity percentages.
Blue backlight is bright and makes the screen easy to read in low light when activated, and automatically turns off after 15 seconds.
Being able to adjust settings with the touchscreen display instead of taking the device off the wall or fridge.
Temperature and humidity trend indicators.
Includes all-time / 24 hours high and low records for temperature and humidity.
Easily reset the temperature and humidity with the press of one front facing button.
Large Screen with Huge Numbers
4″ large LCD display with huge numbers makes it extremely easy to read even at far distances; Low battery indicator.
Backlight Function
The blue backlight is bright and makes the screen easy to read in low light when activated, and automatically turns off after 15 seconds.
Touch Screen
CH/SYNC: Press once to display the temperature and humidity readings from up to 3 outdoor remote sensors;Press and hold this button to enter the synchronization mode. °F/°C : Fahrenheit degree and Celsius degree can switch convinently. Backlight : The screen can light up for easy reading. All time/24 HRs : Allow you to see temperature/humidity in the past or last 24 hours.
The receiver of the TP-65 hygrometer thermometer is capable of displaying the readings from up to 3 outdoor remote sensors to ensure you can monitor multiple locations at the same time such as your bedroom, baby’s room and your outdoor temp.
There is 1 remote sensor in the package, extra sensors sold separately. Link to outdoor remote sensor:
Note:
The remote sensor must be always placed upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the sensor.
Transmission range up to 200 feet in open area. (range maybe shorter based on interference present)
The remote sensor must be always placed upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the sensor.
Weight
1 g
Alexa capability
No
Backlight display
Yes
Barometric pressure
No
Bluetooth
No
Calibration feature
No
Comfort indicator
No
High low records
Yes
Indoor outdoor
Indoor and Outdoor
Mobile app
No
Range
200ft
Remote sensor
TX2
Temperature humidity alerts
No
Weather forecast
No
Wifi capability
No
Remote
Yes
TP-65B Specification
Temperature Range
Base Station
-22.0 to 140.0℉(-30.0 to 60.0℃)
Remote Sensor
-40.0 to 158.0℉(-40.0 to 70.0℃)
Temperature Tolerance
±0.9℉(±0.5℃)from 32 to 140℉(0 to 60℃)
otherwise ±1.8℉(±1℃)
Humidity Range
Base Station
10% ~ 99%
Remote Sensor
10% ~ 99%
Humidity Tolerance
±2%from 30% to 80%，otherwise ±3%
Refresh rate
Base station
30 seconds
Remote sensor
Less than 60 seconds
Sensor Type
NTC
Transmission Range*
300ft (100M)
Wireless Technology
ASK 433Mhz
Display Base Station
LCD, 3 1⁄10 Length x 2 1⁄2 Width inches(79.0L x 62.0W mm)
Backlight
Y
Unit Size
Base Station
4 3⁄8 Length x 3 3⁄8Width x 1 Height inches
(110.0L x 85.0W x 25.0H mm)
Remote Sensor
2 15⁄16 Length x 2 1⁄4 Width x 15⁄16 Height inches
(74.0L x 63.5W x23.0H mm)
Power
Base Station
3.0V( 2x AAA Batteries)
Remote Sensor
3.7V(1 x 18650 Built-in lithium rechargeable battery)
*The stated transmission range is based on tests at an ambient temperature of 77°F or 25°C without any obstructions or electromagnetic interference. Your range can vary depending on the number of obstructions and electromagnetic in your environment
Components
One base station unit (Receiver)
One remote sensor (Transmitter)
*Although the remote sensor is designed to be rain- proof, the remote sensor must be always placed upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.
Indoor base station (receiver) features
Large LCD display
Outdoor temperature
Outdoor humidity
Indoor temperature
Indoor humidity
Four Touch Buttons :
SIDE
Stand
Magnet
Wall hanging hole
Battery compartment
LCD display: Displays the current outdoor humidity/temperature and indoor humidity/temperature.
Battery Compartment: Holds 2 AAA batteries to power the unit.
Tabletop and wall-mounted design.
Indoor Temperature range: -4°F~158°F(-20°C~70°C).
Humidity range: 10% ~ 99%.
Temperature display unit: °C and °F selectable.
Temperature Resolution: 0.1 °C/°F.
Humidity Resolution:1%.
Low battery indication.
Four touch buttons.
Backlight.
Touch Buttons
CHANNEL/SYNC: Press once to display the temperature and humidity readings from up to 3 outdoor remote sensors; Press and hold this button to enter the synchronization mode. MAX/MIN/CLEAR: Touch once to display the maximum or minimum temperature and humidity; Press and hold to clear the history data. °F/°C/History: Press to select the temperature display in ºC or ºF; When the display shows the maximum or minimum temperature and humidity. Touch this button once to set the maximum and minimum data record time interval between ALL TIME or 24 hours. Note: Both ALL TIME and 24 hours represent the time since you last manually cleared the history data or installed a new battery. : Touch once to turn on/off backlight. If you do not press the button for 15 seconds, the backlight will be automatically turned off.
Temperature & Humidity Trend
indicates the temperature & humidity is in an increasing trend.
indicates the temperature & humidity is in a no change trend.
indicates the temperature & humidity is in a decreasing trend.
Outdoor remote sensor (transmitter) features
TX LED
Wall hanging hole
TX
RESET
Channel 1, 2, 3
2 AAA battery
Vent holes
Battery Compartment: Holds 2 X AAA batteries to power the unit.
Rain-proof and wall-mounted design.
Outdoor Temperature range: -4°F ~ 158°F (-20 °C ~ 70 °C).
Humidity range: 10% ~ 99%.
Buttons
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3. RESET: Press once to reset the remote sensor. TX: Press to send temperature/humidity data to the receiver manually.
Battery installation and setup
Open the battery compartment of the remote sensor as below Figure;
Slide the channel selector switch inside the battery compartment to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel;
Insert (2) AAA batteries according to the polarity markings. Replace the battery compartment cover;
Open the battery compartment at the back of the base station and insert (2) AAA batteries according to the polarity markings. Replace the compartment door;
Note: Do not mix old and new batteries. Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries. For maximum performance in normal conditions we recommend using good quality alkaline batteries. If the battery power is low, there will be low battery icon showing on the base station display.
Synchronize remote sensors with the base Station
Please note: each time the batteries (either base station or remote sensor) are replaced or base station/ remote sensor lost connection, make sure to follow the below synchronization process to pair and reconnect the base station and remote sensor:
Position the remote sensor near the base station;
Once the batteries are installed in the base station, the RF signal icon (located on the upper left of the base station display) will flash for 3 minutes, indicating that the base station is in synchronization mode: it is waiting for remote sensors to be registered.
If 3 minutes have passed after the batteries were installed in the base station and the RF signal Icon is no longer flashing, press and hold the CHANNEL/SYNC button of the base station for 3-4 seconds until the RF signal icon is flashing again to set it back in synchronization mode;
Install the batteries in the remote sensor and wait for a moment or just press either the TX or RESET button inside the remote sensor battery compartment, the remote sensor temperature/ humidity will show on the base station display which indicates the synchronization is complete.
If you have additional remote sensors, repeat the above steps to register the remote sensors (up to 3 remote sensors can be registered with one base station);
If you have registered more than one sensor, press the CHANNEL/SYNC button on the base station to select the remote channel you want displayed permanently on the base station. Press CHANNEL/SYNC button until you observe a circular arrow on the base station LCD display under the channel number. The unit will then auto-scroll, changing from channel to channel every 5 seconds.
NOTE: If you have additional remote sensors, when you are synchronizing remote sensors with the base station, the unit will keep changing from channel to channel in the first three minutes, after that you can select any channel you like or auto-scroll mode.
Place the base station and remote sensor
The indoor base station (receiver) should always be placed in a well ventilated indoor area and located away from vents, heating or cooling elements, direct sunlight, windows, doors, or any other openings.
The remote sensor (transmitter) can be placed on a flat surface indoor or outdoor. Make sure the sensor is within the transmission distance from the base station and with minimal obstructions.
The base station and remote sensor can both be wall mounted.
NOTE: Although the remote sensor is designed to be rain-proof, the remote sensor must be always placed upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.
Maximum & minimum recorded temperature & humidity
Press MAX/MIN/Clear button once to display the highest indoor and outdoor temperatures/humidity recorded since last reset. MAX is shown on the display.
Press MAX/MIN/Clear button again to display the lowest indoor and outdoor temperatures/humidity recorded since last reset. MIN is shown on the display.
To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD display, press and hold MAX/MIN/Clear for 3 seconds.
When either the MAX or MIN record is shown on the LCD display, press ALL-TIME/24 button once to set the data record time interval between ALL TIME or 24 hours. Note: Both ALL TIME and 24 hours represent the time since you last time manually cleared the history data or battery installation.
Question: Are the outdoor sensors weatherproof?
Answer: Yes, but not waterproof.
Question: Will they ever be available again? Will the TP-60 sensor work with the TP-65B?
Answer: Yes, the TP65B sensors would work. We just don’t offer the TP-65B sensors yet as the unit is new.
Question: Can multiple base units work with the same sensors? For example, I would have 1 base unit at separate locations, but still connected to the same sensors. Is this possible, or will they only work with one base unit at a time?
Answer: Yes, of course. They will work with multiple base stations at the same time.
We truly pride ourselves on a hassle-free, friendly customer support experience with a team that’s available 5 days a week from 8:00 am to 6:00 pm EST. Rest assured if you contact us by email, phone, or online chat, you’ll be speaking to a native speaker in your spoken language.
The customer service team is always listening, taking notes, and quantifying complaints to ensure our products are continually improved. Due to selling directly to you, the customer, via Amazon, we can use product reviews to help us improve our existing products or help further development of new products.
INDUSTRY LEADING WARRANTY
Our warranty coverage for our products is the backbone of our company and we’re capable of offering such a robust warranty is that we believe in our product quality due to our feedback based design philosophy and if anything does happen, we’ll stand behind our products. This also enables our customer support to team deliver continuously great experiences.
: Touch once to turn on/off backlight. If you do not press the button for 15 seconds, the backlight will be automatically turned off.
indicates the temperature & humidity is in an increasing trend.
indicates the temperature & humidity is in a no change trend.
indicates the temperature & humidity is in a decreasing trend.
(located on the upper left of the base station display) will flash for 3 minutes, indicating that the base station is in synchronization mode: it is waiting for remote sensors to be registered.
